Aeromarine 1/8 scale bud hydroplane
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: , CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Aeromarine 1/8 scale bud hydroplane
I'm looking at buying a Aeromarine 1/8 Scale bud hydroplane hull. Does any one have any pictures of the hull. I looked on Aeromarines web site and they only have one picture of the hull. If any one could post some pictures of this hul I really would appreciate it.
Thanks!!!!
Thanks!!!!
#4
My Feedback: (1)
RE: Aeromarine 1/8 scale bud hydroplane
It's not a big seller in the 1/8 scale hydro boating world. The serious racers would either build their own or buy a higher quality/more accurate boat.
http://rcmarinedesigns.20megsfree.com/
http://rcmarinedesigns.20megsfree.com/
#5
Junior Member
Thread Starter
Join Date: Sep 2005
Location: , CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aeromarine 1/8 scale bud hydroplane
Thanks for the info Ron!!!! That is exactly what I wanted to know. I plan on getting into racing. Also thans for the link to the other web site. I plan on buying one of their boats.
#8
My Feedback: (1)
RE: Aeromarine 1/8 scale bud hydroplane
Phil says to use thinned spackling, yes, the kind used to fix cracks in walls. I used some White Squadron putty that I got from the LHS. It's used for plastic models. Some will apply a thin coat to the entire hull then sand it off. A lot of the pinholes are hard to see until you get them filled or put a coat of primer on the hull. On expoxy-glas hulls you have to watch the sanding as you can have more pinholes popping up if you start sanding into the epoxy. Use Scotch-brite pads to sand with when you can.
#9
Junior Member
Join Date: Apr 2024
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking at buying a Aeromarine 1/8 Scale bud hydroplane hull. Does any one have any pictures of the hull. I looked on Aeromarines web site and they only have one picture of the hull. If any one could post some pictures of this hul I really would appreciate it.
Thanks!!!!
Thanks!!!!