RCU Forums
stitching on rudder
stitching on rudder
0 2025/06/12 21:25:59
top of lower wing
top of lower wing
0 2025/06/12 21:27:05
tape applied cut from Top Flight Fabrikote
tape applied cut from Top Flight Fabrikote
0 2025/06/12 21:29:32
tapes on the bottom of wing
tapes on the bottom of wing
0 2025/06/12 21:29:50
the stitches for the ailerons will be made from fishing line segments glued on and taped over. I didn't even have enough of the other left to do them.
the stitches for the ailerons will be made from fishing line segments glued on and taped over. I didn't even have enough of the other left to do them.
0 2025/06/12 21:30:28
0 2025/06/12 21:45:57
applying dope to tail
applying dope to tail
0 2025/06/12 21:46:08
finished painting the rudder
finished painting the rudder
0 2025/06/12 21:46:20
I contacted Callie Graphics today they are going to make the graphics for a very reasonable price
I contacted Callie Graphics today they are going to make the graphics for a very reasonable price
0 2025/06/12 21:46:34
0 2025/06/12 21:50:09
applying fishing line as stitches
applying fishing line as stitches
0 2025/06/13 23:13:37
each one is dipped in medium ca and stuck in place with tweezers
each one is dipped in medium ca and stuck in place with tweezers
0 2025/06/13 23:13:50
0 2025/06/13 23:14:01
tape applied
tape applied
0 2025/06/13 23:14:16
finished aileron
finished aileron
0 2025/06/13 23:14:28
wrapping on wing struts. I started to use thread on them but I wasn't having any fun wrapping the front one due to the angle so I found a different way to simulate the wrap with a piece of thin velcro that gives the look of wrapped.
wrapping on wing struts. I started to use thread on them but I wasn't having any fun wrapping the front one due to the angle so I found a different way to simulate the wrap with a piece of thin velcro that gives the look of wrapped.
0 2025/06/20 21:32:26
flying wires attached to wing, adds a lot to the looks and helps stabilize the 2 piece lower wing.
flying wires attached to wing, adds a lot to the looks and helps stabilize the 2 piece lower wing.
0 2025/06/20 21:33:05
looks ok from a foot away
looks ok from a foot away
0 2025/06/20 21:35:06
started hooking up the rudder and elevator.
started hooking up the rudder and elevator.
0 2025/06/20 21:35:22
0 2025/06/21 22:25:48
pull pull wires connected
pull pull wires connected
0 2025/06/21 22:25:13
still need to color the stab
still need to color the stab
0 2025/06/21 22:25:24
0 2025/06/21 22:25:34
0 2025/06/25 22:35:18
I like the looks of this one
I like the looks of this one
0 2025/06/25 22:35:02
This is another replica plane
This is another replica plane
0 2025/06/25 22:35:36
this is a nice looking model
this is a nice looking model
0 2025/06/25 22:37:18
0 2025/06/25 22:42:12
0 2025/06/25 22:54:05
nails inserted
nails inserted
0 2025/07/02 22:40:13
0 2025/07/02 22:39:36
stitching done
stitching done
0 2025/07/02 22:40:46
0 2025/07/02 22:41:17
gromet strips glued on
gromet strips glued on
0 2025/07/02 22:39:54
0 2025/07/02 22:41:40
mold to mount on front of engine
mold to mount on front of engine
0 2025/07/13 21:55:55
fishing weight
fishing weight
0 2025/07/13 21:55:41
test fit
test fit
0 2025/07/13 21:56:36
weight installed
weight installed
0 2025/07/13 21:56:13
"Scale Rib Stitch" applied
"Scale Rib Stitch" applied
0 2025/09/11 21:33:46
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.